250型橡胶切断机

[用　　途]
可将各种橡胶块、条任意切断。适应于各种斜胶轮胎、钢丝轮胎、橡胶条等橡胶件的切断。
[结构与原理]
该机由一对刀片、二台减速电机、机架及转动机构等组成。其基本原理为通过二台电机的等速运转，分别带动二刀片作相对运转，促使两刀具形成剪切之势，将物料置于两刀片之间，并向前推动，达到剪切之效果。
[特　　点]
该设备剪切力大，剪切效果好，剪切速度快，能耗低，体积小，移动十分方便，由于采用慢转速，故操作方便、安全。

Use: Can cut off various kinds of rubber piece。 Adapt to the cutting off various kinds of rubber ones ，such as oblique rubber tire，steel wire tire , rubber lump ，etc。

Structure and principle: The machine consist of a pair of blade，two retarding motors， frame and transmission mechanism etc。 its Basic principle is through the two electrical machineries turning round at the same speed to drive the two blades making relative turning round separately， impeling the two cutters to form the shearing tendency，putting the materials between the two blades and promoting forward，finally getting the result of shearing。

Characteristic: This equipment has strong shear strength， good shear effect, fast shear speed ，low consumption of energy ，small in volume,and it is very convenient to move，because adopt the slow rotational speed，so it can easy and safe to be operated